Garmin D2 Charlie Owners Manual - Page 12

Resting During Pool Swimming The default rest screen displays two rest timers. It also displays time and distance for the last completed interval. NOTE: Swim data is not recorded during a rest. 1 During your swim activity, select BACK to start a rest. The display reverses to white text on a black background, and the rest screen appears. 2 During a rest, select UP or DOWN to view other data screens (optional). 3 Select BACK, and continue swimming. 4 Repeat for additional rest intervals. Training with the Drill Log The drill log feature is available only for pool swimming. You can use the drill log feature to manually record kick sets, one-arm swimming, or any type of swimming that is not one of the four major strokes. 1 During your pool swim activity, select UP or DOWN to view the drill log screen. 2 Select BACK to start the drill timer. 3 After you complete a drill interval, select BACK. The drill timer stops, but the activity timer continues to record the entire swim session. 4 Select a distance for the completed drill. Distance increments are based on the pool size selected for the activity profile. 5 Select an option: • To start another drill interval, select BACK. • To start a swim interval, select UP or DOWN to return to the swim training screens. Golfing Playing Golf Before you play golf, you should charge the device (Charging the Device, page 1). 1 From the watch face, select > Golf. 2 Go outside, and wait while the device locates satellites. 3 Select a course from the list of available courses. 4 Select Yes to keep score. 5 Select UP or DOWN to scroll through the holes. The device automatically transitions when you move to the next hole. 6 After you complete your activity, select Yes. > End Round > Hole Information Because pin locations change, the device calculates the distance to the front, middle, and back of the green, but not the actual pin location. Current hole number À Distance to the back of the green Á Distance to the middle of the green  Distance to the front of the green à Par for the hole Ä Next hole Previous hole Moving the Flag You can take a closer look at the green and move the pin location. 1 From the hole information screen, select > Move Flag. 2 Select UP or DOWN to move the pin position. 3 Select . The distances on the hole information screen are updated to show the new pin location. The pin location is saved for only the current round. Viewing Hazards You can view distances to hazards along the fairway for par 4 and 5 holes. Hazards that affect shot selection are displayed individually or in groups to help you determine the distance to layup or carry. 1 From the hole information screen, select > Hazards. • The distances to the front and back of the nearest À Á hazard appear on the screen. • The hazard type is listed at the top of the screen.  • The green is represented as a half circle at the top of à the screen. The line below the green represents the center of the fairway. • Hazards are shown below the green in approximate Ä locations relative to the fairway. 2 Select UP or DOWN to view other hazards for the current hole. Measuring a Shot 1 Take a shot, and watch where your ball lands. 2 Select > Measure Shot. 3 Walk or drive to your ball. The distance automatically resets when you move to the next hole. 4 If necessary, select Reset to reset the distance at any time. Viewing Layup and Dogleg Distances You can view a list of layup and dogleg distances for par 4 and 5 holes. Select > Layups. Each layup and the distance until you reach each layup appear on the screen. NOTE: Distances are removed from the list as you pass them. Keeping Score 1 From the hole information screen, select > Scorecard. The scorecard appears when you are on the green. 2 Select UP or DOWN to scroll through the holes. 3 Select to select a hole. 4 Select UP or DOWN to set the score. 6 Activities