Garmin eTrex Legend CX Owner's Manual - Page 12
Installing the Batteries, To install the lanyard - owners manual
UPC - 753759049140
View all Garmin eTrex Legend CX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
GETTING STARTED > UNIT OVERVIEW Installing the Batteries The eTrex operates on two AA batteries (not included), which are installed in the back of the unit. You can use Alkaline or NiMH batteries. See page 57 for information on setting the battery type. To install the batteries: 1. Remove the battery cover by turning the D-Ring 1/4 turn counter-clockwise and pulling the cover loose. PUSH TO EJECT 2. Insert the batteries, observing the proper polarity. A polarity diagram is molded into the battery compartment. Locking pin slot Battery compartment 3. Reinstall the battery cover by aligning the back cover with the unit and turning the D-Ring 1/4 turn clockwise. Remove the batteries from your eTrex when you do not expect to use the unit for several months. Stored data is not lost when batteries are removed. 2 To install the lanyard: 1. Place the loop of the lanyard through the slot at the upper-left side on the back of the unit. 2 Route the strap through the loop, and pull tight. Belt Clip (attaches to belt or waistband) Belt Clip Knob (attaches to back of unit) Lanyard installation Auxiliary Mount Adapter (Do not discard. This adapter attaches to the unit for connection to mounting kits.) eTrex Venture Cx and Legend Cx Owner's Manual