HP 2300d Service Manual - Page 176
Transfer roller, Removing the transfer roller
UPC - 808736471091
View all HP 2300d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
Transfer roller 1 Remove all of the covers and the control-panel assembly (see pages 113 through 124). 2 Remove the laser/scanner plate (page 144). 3 Use needle-nose pliers to pinch the tabs on the transfer roller bushings, one at each side of the transfer roller. Figure 99. Removing the transfer roller 4 Lift the transfer roller out of the printer. Reinstall note The spring at the left side of the transfer roller should remain attached to the bushing. Before you reinstall the roller, make sure that the spring is attached. The spring at the right side should remain in the printer. 174 Removal and replacement ENWW
174
Removal and replacement
ENWW
Transfer roller
1
Remove all of the covers and the control-panel assembly (see pages 113 through 124).
2
Remove the laser/scanner plate (page 144).
3
Use needle-nose pliers to pinch the tabs on the transfer roller bushings, one at each side of
the transfer roller.
Figure 99.
Removing the transfer roller
4
Lift the transfer roller out of the printer.
Reinstall note
The spring at the left side of the transfer roller should remain attached to the bushing. Before you
reinstall the roller, make sure that the spring is attached. The spring at the right side should
remain in the printer.