HP 2300d Service Manual - Page 192

Message Description Recommended action TYPE MISMATCH TRAY [XX]=[TYPE] alternates with Ready For help press The system detected a different type of media from the type specified for the tray in the paper path coming from tray XX. 1 Verify that the correct media is loaded in the tray. 2 Check the driver settings to make sure that the expected media type is selected. 3 Check the media-type settings on the printer control panel to make sure that the printer is set for the media type that is in the tray. 4 Refer to the printer software online Help for more information. USE TRAY [XX] [TYPE] [SIZE] alternates with To change press / To continue press The printer did not detect the type and size of media requested. The message shows the most likely type and size available and the tray in which they are available. Press (Select button) to accept the values in the message, or use (Up button) and (Down button) to scroll through the available choices. Wait for printer to reinitialize The printer is reinitializing in one of the following situations: q The user has changed the RAM DISK settings before the printer is automatically rebooted. q The printer is auto power cycling after changing external device modes. q The user has exited Diagnostics. No action necessary. Warming up The printer is coming out of Powersave mode. Printing continues as soon as the printer has warmed up. No action necessary. 10.XX.YY SUPPLIES MEMORY ERROR For help press An error has occurred in one or more of the printer's supplies. Values of XX and YY are listed below: XX 00 = memory is defective 01 = memory is missing YY 00 = black print cartridge 1 Turn the printer power off, and then turn the printer power on to clear the message. 2 If the message persists, contact an HP-authorized service or support provider (see "Ordering parts and supplies and getting support" on page 242). 190 Troubleshooting ENWW