HP 2300d Service Manual - Page 65
Operation, Resolution, Fastres 1200, Prores 1200, Light, Medium, Economode, Toner Density
UPC - 808736471091
View all HP 2300d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Table 13. Configure device menu-print-quality submenu Item Values Explanation RESOLUTION 300 600 *FASTRES 1200 PRORES 1200 Selects the resolution. All values print at the same speed. q 300: Produces draft print quality and can be used for compatibility with the HP LaserJet III family of printers. q 600: Produces high-quality text printing and can be used for compatibility with the HP LaserJet 4 family of printers. q FASTRES 1200: Produces 1200-dpi print quality for fast, high-quality printing of business text and graphics. q PRORES 1200: Produces 1200-dpi printing for the best quality in line art and graphic images. NOTE: It is best to change the resolution in the program or printer driver. (Program and printer-driver settings override control-panel settings.) RET OFF Use the Resolution Enhancement technology (REt) setting LIGHT to produce print that has smooth angles, curves, and *MEDIUM edges. DARK REt does not affect print quality if the print resolution is set to FastRes 1200. All other print resolutions benefit from REt. NOTE: It is best to change the REt setting in the program or printer driver. (Program and printer-driver settings override control-panel settings.) ECONOMODE *OFF ON Turn EconoMode ON (to save toner) or OFF (for high quality). EconoMode creates draft-quality printing by reducing the amount of toner on the printed page. NOTE: It is best to turn EconoMode on or off in the program or printer driver. (Program and printer-driver settings override control-panel settings.) CAUTION: HP does not recommend full-time use of EconoMode. If EconoMode is used full-time, it is possible that the toner supply will outlast the mechanical parts in the print cartridge. TONER DENSITY 1 2 *3 4 5 Lighten or darken the print on the page by setting the toner density. Select a setting ranging from 1 (light) to 5 (dark). The default setting of 3 usually produces the best results. CREATE CLEANING PAGE There is no value to select. Press (SELECT) to print a cleaning page (to clean toner from the fuser). Open the rear output bin. Follow the instructions on the cleaning page. For more information, see "Cleaning the fuser" on page 76. PROCESS CLEANING PAGE There is no value to select. This item is available only after a cleaning page has been created. Follow the instructions on the cleaning page. The cleaning process might take up to 2.5 minutes. ENWW Chapter 3 Operation 63