HP 2300d Service Manual - Page 232
Resetting the printer, Setting the language, Cold reset, NVRAM initialization
UPC - 808736471091
View all HP 2300d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 232 highlights
Note Note Resetting the printer Cold reset A cold reset returns the control panel settings to the default factory settings. A cold reset also resets EIO. To retain EIO settings, remove the EIO card before performing a cold reset. To perform a cold reset, complete the following steps: 1 Turn off the printer. 2 Press and hold (SELECT), and turn on the printer. 3 When all three status lights are lit, release (SELECT). 4 Use (UP arrow) or (DOWN arrow) to scroll to COLD RESET, and press (SELECT). NVRAM initialization Before performing a hard-disk initialization, print a menu map and a configuration page. Use the information on the configuration page to reset any customer-set printer configuration values that the hard disk initialization procedure changes. Performing an NVRAM initialization clears the NVRAM of all control panel settings including the following: q Model number q Serial number q Service ID q Usage data (such as page counts, number of copies count, maintenance counts), q Event log To perform an NVRAM initialization, complete the following steps: 1 Turn off the printer. 2 Press and hold (DOWN arrow), and turn on the printer. 3 When all three status lights are lit, release (DOWN arrow) and press (UP arrow). 4 Press PAUSE/RELEASE. The first item of a menu appears. 5 Use (UP arrow) or (DOWN arrow) to scroll to NVRAM INIT, and press (SELECT). Setting the language To set the printer control panel display language, perform the following steps: 1 Turn off the printer. 2 Press (SELECT) and hold it while turning on the printer. 3 Release (SELECT) when all three status lights are lit. The lights cycle and the HP logo appears on the control panel display. The message INITIALIZING appears, and then a menu appears. 4 Use (UP arrow) or (DOWN arrow) to scroll to SELECT LANGUAGE, and then press (SELECT). The control panel displays a list of available languages. 5 Use (UP arrow) or (DOWN arrow) to scroll to the correct language, and then press (SELECT) to save the selection. 230 Troubleshooting ENWW