HP 2300d Service Manual - Page 60

Table 11. Paper-handling menu (continued) Item Values Explanation TRAY 2 TYPE ANY TYPE PLAIN PREPRINTED *LETTERHEAD TRANSPARENCY PREPUNCHED LABELS BOND RECYCLED COLOR ROUGH Sets the value to correspond with the paper type currently loaded in tray 2. TRAY 3 SIZE *ANY SIZE LETTER A4 Sets the value to correspond with the paper size currently loaded in tray 3. NOTE: This menu appears only if a tray 3 is installed. TRAY 3 TYPE *ANY TYPE PLAIN PREPRINTED LETTERHEAD TRANSPARENCY PREPUNCHED LABELS BOND RECYCLED COLOR ROUGH Sets the value to correspond with the paper type currently loaded in tray 3. NOTE: This menu appears only if a tray 3 is installed. TRAY [N] CUSTOM There is no value to This item appears only if a tray is set to a custom size. select. UNIT OF MEASURE X DIMENSION Y DIMENSION INCHES *MILLIMETERS Selects the unit of measure to use when you set custom paper sizes for the specified tray. 3.0 to 8.50 INCHES Sets the measurement of the width of the paper 76 to 216 MM (measurement from side to side in the tray). 5.0 to 14.00 INCHES Sets the measurement of the length of the paper 127 to 356 MM (measurement from front to back in the tray). After the Y DIMENSION value is selected, a summary screen appears. This screen contains feedback that summarizes all the information that was selected on the previous three screens, such as TRAY 1 SIZE= 8.50 x 14 INCHES, Setting saved. 58 Operation ENWW