HP 3800 HP Color LaserJet 3000, 3600, 3800 series Printers - User Guide - Page 139
Tray size cannot be ANY SIZE/ANY, 8X.YYYY EMBEDDED JETDIRECT ERROR - color laserjet calibration
UPC - 689466270464
View all HP 3800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Control panel message Description Recommended action 8X.YYYY EMBEDDED JETDIRECT ERROR The HP Jetdirect embedded print server has 1. encountered a critical error. 2. Turn the printer off and then on. If the problem persists, contact HP Support. To change press To skip, press STOP The printer has an internal clock that tracks the date and time. You are prompted to set the correct date and time the first time you turn on the printer. Press to change the date and time. Press Stop to skip this step. You can set the date and time later by using the SYSTEM SETUP menu. If the prompt appears each time you turn on the printer, the clock is not working correctly. Contact HP support. Access Denied MENUS LOCKED The printer administrator has enabled the control-panel security mechanism. You cannot modify control-panel settings in this circumstance. The message disappears after a few seconds, and the printer returns to Ready or BUSY state. Contact the printer administrator to change settings. ACTION NOT CURRENTLY AVAILABLE ON TRAY X alternates with Tray size cannot be ANY SIZE/ANY CUSTOM You are trying to set duplex registration for a tray that is configured for ANY SIZE or ANY CUSTOM. Duplex registration is not available when the tray size is set to either of these settings. Change the size setting for the tray. BAD DUPLEXER CONNECTION The duplexer is not installed correctly. Turn the printer off and then on to continue. alternates with To continue turn off then on Calibrating... The printer is calibrating. No action necessary. Canceling... The printer is in the process of canceling a job. The message appears while the job is stopped, the paper path is flushed, and any remaining incoming data on the active data channel is received and discarded. No action necessary. Checking paper path The engine is turning the rollers to check for No action necessary. possible jams. Checking printer The engine is performing an internal test. No action necessary. CHOSEN PERSONALITY NOT AVAILABLE alternates with To continue press The printer encountered a request for a personality that did not exist in the printer. The job is cancelled and no pages are printed. 1. Press to continue. 2. Try a different driver. NOTE For the HP Color LaserJet 3600 Series printers, you must use the driver that was specifically designed for these printers. CLEANING DISK X% COMPLETE alternates with DO NOT POWER OFF The memory disk is being cleaned. This process might take up to an hour. During this time, no jobs can be printed. Do not turn off the printer. Wait for the process to complete. The printer automatically restarts at the end of the cleaning process. ENWW Control-panel messages 125