HP 3800 HP Color LaserJet 3000, 3600, 3800 series Printers - User Guide - Page 145
Ram Disk File System Is Full, Ram Disk Is Write Protected - color laserjet firmware
UPC - 689466270464
View all HP 3800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Control panel message RAM DISK DEVICE FAILURE alternates with Ready To clear press RAM DISK FILE OPERATION FAILED alternates with Ready To clear press RAM DISK FILE SYSTEM IS FULL alternates with Ready To clear press RAM DISK IS WRITE PROTECTED alternates with Ready To clear press RAM DISK X Initializing alternates with DO NOT POWER OFF Receiving upgrade REMOVE ALL PRINT CARTRIDGES alternates with To exit press STOP key REMOVE AT LEAST ONE PRINT CARTRIDGE alternates with To exit press STOP key REPLACE CARTRIDGE alternates with For help press Description For the HP Color LaserJet 3000 and 3800 Series printers only. The RAM disk has failed. Recommended action 1. Printing can continue for jobs that do not require the RAM disk. 2. To remove this message from the display, press . For the HP Color LaserJet 3000 and 3800 1. Series printers only. 2. The printer received a PJL file system command that attempted to perform an illogical operation (for example, to download 3. a file to a non-existent directory). Printing can continue. To remove this message from the display, press . If the message reappears, there might be a problem with the software program. For the HP Color LaserJet 3000 and 3800 Series printers only. The printer received a PJL file system command to store something on the file system, but the file system is full. 1. Use HP Web Jetadmin software to delete files from the RAM disk memory and try again. 2. To remove this message from the display, press . See HP Web Jetadmin for more information. For the HP Color LaserJet 3000 and 3800 1. Series printers only. The file system is protected and no new files can be written to it. 2. To enable writing to the RAM disk memory, use HP Web Jetadmin to turn off write protection. To remove this message from the display, press . See HP Web Jetadmin for more information. For the HP Color LaserJet 3000 and 3800 Series printers only. No action necessary. The new RAM disk installed in slot X is initializing. A firmware upgrade is in progress. Do not turn the printer off until the printer returns to Ready. The printer is performing a component test. Remove all print cartridges. After diagnostics are complete, reinstall all print cartridges. The printer is performing a disable cartridge check or component test. Remove one print cartridge. After the test is complete, reinstall the print cartridge. The print cartridge has reached its end of life. Printing will not continue until the cartridge is replaced. Press for help. See Changing print cartridges or Replacing supplies and parts for more information. See Supplies and accessories for more information. ENWW Control-panel messages 131