HP 6120XG HP ProCurve Series 6120 Blade Switches IPv6 Configuration Guide - Page 155
Syntax, ipv6-address, link-local-address, hostname, switch-number, < oobm >
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
IPv6 Diagnostic and Troubleshooting Ping for IPv6 (Ping6) Syntax: ping6 < ipv6-address | hostname | switch-number > [repetitions < 1 - 10000 >] [timeout < 1 - 60 >] [data-size < 0 - 65507 >] [data-fill < 0 - 1024 >] [source < ipv6-addr | vid >] [oobm] ping6 [repetitions < 1 - 10000 >] [timeout < 1 - 60 >] [data-size < 0 - 65507 >] [data-fill < 0 - 1024 >] [source < ipv6-addr | vid >][oobm] Pings the specified IPv6 host by sending ICMP version 6 (ICMPv6) echo request packets to the specified host. : IPv6 address of a destination host device. < link-local-address >%vlan: IPv6 link-local address, where %vlan specifies the VLAN ID number. < hostname >: Host name of an IPv6 host device configured on an IPv6 DNS server. < switch-number >: Number of an IPv6-based switch that is a member of a switch stack (IPv6 subnet). Valid values: 1 16. < oobm >: For switches that have a separate out-of-band management (OOBM) port, oobm specifies that the traffic originates from the out-of-band management port. [repetitions < 1 - 10000>]: Number of times that IPv6 ping packets are sent to the destination IPv6 host. Default: 1. [timeout < 1 - 60 >]: Number of seconds within which a response is required from the destination host before the ping test times out. Valid values: 1 - 60. Default: 1 second. [data-size ]: The IPv6 address of the pinging device or the VLAN-ID on which the ping is being sent. Default: 0 (no text is used). 7-3