HP 6120XG HP ProCurve Series 6120 Blade Switches IPv6 Configuration Guide - Page 159
Default, Range, timeout, probes, source <, Examples of IPv6 Traceroute Probes
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
IPv6 Diagnostic and Troubleshooting Traceroute for IPv6 timeout: Number of seconds within which a response is required from the IPv6 device at each hop in the route to the destination host before the traceroute operation times out. Default: 5 seconds; Range: 1 - 60. probes: Number of times a traceroute is performed to locate the IPv6 device at any hop in the route to the specified host before the operation times out. Default: 3; Range: 1 - 5. [source < ipv6-addr | vid >]: The source IPv6 address or VLAN of the traceroute device or the VLAN-ID on which the traceroute packet is being sent. ProCurve# traceroute6 2001:db8::10 traceroute to 2001:db8::10 1 hop min, 30 hops max, 5 sec. timeout, 3 probes 1 2001:db8::a:1c:e3:3 0 ms 2 2001:db8:0:7::5 7 ms 3 2001:db8::214:c2ff:fe4c:e480 0 ms 4 2001:db8::10 0 ms Destination IPv6 address 0 ms 3 ms 1 ms 1 ms 0 ms 0 ms 0 ms 0 ms Intermediate router hops with the time (in milliseconds) for the switch to receive a response from each of the three probes sent to each router. ProCurve# traceroute6 2001:db8::10 maxttl 7 traceroute to fe80::1:2:3:4 1 hop min, 7 hops max, 5 sec. timeout, 3 probes 1 2001:db8::a:1c:e3:3 0 ms 0 ms 0 ms 2 2001:db8:0:7::5 0 ms 0 ms 0 ms At hop 3, the first and third probes timed 3 * 2001:db8::214:c2ff:fe4c:e480 * out, but the second probe reached the 4 *** router. Each timed-out probe is displayed 5 *** with an asterisk (*). 6 *** 7 *** The four remaining probes within the configured seven-hop maximum (maxttl) also timed out without finding a next-hop router or the destination IPv6 address. Figure 7-2. Examples of IPv6 Traceroute Probes 7-7