HP 6120XG HP ProCurve Series 6120 Blade Switches IPv6 Configuration Guide - Page 71
Configuring IPv6 Addressing
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Note IPv6 Addressing Configuration Configuring IPv6 Addressing • statically replacing the automatically generated link-local address • statically adding global unicast, unique local unicast, and/or anycast addresses Configuring IPv6 Addressing In the default configuration on a VLAN, any one of the following commands enables IPv6 and creates a link-local address. Thus, while any one of these methods is configured on a VLAN, IPv6 remains enabled and a link-local address is present: ipv6 enable (page 4-6) ipv6 address autoconfig (page 4-7) ipv6 address dhcp full [rapid-commit] (page 4-9) ipv6 address fe80:0:0:0:< device-identifier > link-local (page 4-12) ipv6 address < prefix:device-identifier > (page 4-13) Addresses created by any of these methods remain tentative until verified as unique by Duplicate Address Detection. (Refer to "Duplicate Address Detec tion (DAD)" on page 4-18.) 4-5