HP 6120XG HP ProCurve Series 6120 Blade Switches IPv6 Configuration Guide - Page 77

Configuring a Static IPv6 Address on a VLAN

Page 77 highlights

IPv6 Addressing Configuration Configuring a Static IPv6 Address on a VLAN ■ DHCPv6 and statically configured global unicast or anycast addresses are mutually exclusive on a given VLAN. That is, configuring DHCPv6 on a VLAN erases any static global unicast or anycast addresses previously configured on that VLAN, and the reverse. (A statically configured linklocal address will not be affected by configuring DHCPv6 on the VLAN.) ■ For the same subnet on the switch, a DHCPv6 global unicast address assignment takes precedence over an autoconfigured address assign­ ment, regardless of which address type was the first to be configured. If DHCPv6 is subsequently removed from the configuration, then an autoconfigured address assignment will replace it after the next router adver­ tisement is received on the VLAN. DHCPv6 and autoconfigured addresses co-exist on the same VLAN if they belong to different subnets. For related information refer to: ■ RFC 3315: "Dynamic Host Configuration Protocol for IPv6 (DHCPv6)" ■ RFC 3633: "IPv6 Prefix Options for Dynamic Host Configuration Protocol (DHCP) version 6" ■ RFC 3736: "Stateless Dynamic Host Configuration Protocol (DHCP) Service for IPv6" Configuring a Static IPv6 Address on a VLAN This option enables configuring of unique, static unicast and anycast IPv6 addresses for global and link-local applications, including: ■ link-local unicast (including EUI and non-EUI device identifiers) ■ global unicast (and unique local unicast) ■ anycast 4-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178

IPv6 Addressing Configuration
Configuring a Static IPv6 Address on a VLAN
DHCPv6 and statically configured global unicast or anycast addresses are
mutually exclusive on a given VLAN. That is, configuring DHCPv6 on a
VLAN erases any static global unicast or anycast addresses previously
configured on that VLAN, and the reverse. (A statically configured link-
local address will not be affected by configuring DHCPv6 on the VLAN.)
For the same subnet on the switch, a DHCPv6 global unicast address
assignment takes precedence over an autoconfigured address assign-
ment, regardless of which address type was the first to be configured.
If
DHCPv6 is subsequently removed from the configuration, then an auto-
configured address assignment will replace it after the next router adver-
tisement is received on the VLAN. DHCPv6 and autoconfigured addresses
co-exist on the same VLAN if they belong to different subnets.
For related information refer to:
RFC 3315: “Dynamic Host Configuration Protocol for IPv6 (DHCPv6)”
RFC 3633: “IPv6 Prefix Options for Dynamic Host Configuration Protocol
(DHCP) version 6”
RFC 3736: “Stateless Dynamic Host Configuration Protocol (DHCP)
Service for IPv6”
Configuring a Static IPv6 Address on a
VLAN
This option enables configuring of unique, static unicast and anycast IPv6
addresses for global and link-local applications, including:
link-local unicast (including EUI and non-EUI device identifiers)
global unicast (and unique local unicast)
anycast
4-11