HP 6120XG HP ProCurve Series 6120 Blade Switches IPv6 Configuration Guide - Page 93

Example of Show IPv6 VLAN &lt, > Output

Page 93 highlights

IPv6 Addressing Configuration View the Current IPv6 Addressing Configuration ProCurve# show ipv6 vlan 10 Internet (IPv6) Service IPv6 Routing : Disabled Default Gateway : fe80::213:c4ff:fedd:14b0%vlan10 ND DAD : Enabled DAD Attempts : 3 Vlan Name IPv6 Status : VLAN10 : Enabled IPv6 Address/Prefixlength Expiry 2001:db8:a03:e102::1:101/64 Fri May 19 11:51:15 2009 fe80::1:101/64 permanent Figure 4-3. Example of Show IPv6 VLAN < vid > Output Syntax: show run In addition to the other elements of the current configuration, this command lists the statically configured, global unicast and anycast IPv6 addressing, and the current IPv6 configura­ tion per-VLAN. The listing may include one or more of the following, depending on what other IPv6 options are config­ ured on the VLAN. Any stateless address autoconfiguration (SLAAC) commands in the configuration are also listed in the output, but the actual addresses resulting from these commands are not included in the output. ■ ipv6 enable ■ ipv6 address fe80::< device-id > link-local ■ ipv6 address < prefix >:< device-id >/< prefix-length > ■ ipv6 address autoconfig ■ ipv6 address dhcp full [rapid-commit] ■ ipv6 < global-unicast-address >/< prefix > anycast 4-27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178

IPv6 Addressing Configuration
View the Current IPv6 Addressing Configuration
ProCurve# show ipv6 vlan 10
Internet (IPv6) Service
IPv6 Routing
: Disabled
Default Gateway : fe80::213:c4ff:fedd:14b0%vlan10
ND DAD
: Enabled
DAD Attempts
: 3
Vlan Name
: VLAN10
IPv6 Status
: Enabled
IPv6 Address/Prefixlength
Expiry
------------------------------------------- -------------------------
2001:db8:a03:e102::1:101/64
Fri May 19 11:51:15 2009
fe80::1:101/64
permanent
Figure 4-3.
Example of Show IPv6 VLAN <
vid
> Output
Syntax:
show run
In addition to the other elements of the current configuration,
this command lists the statically configured, global unicast
and anycast IPv6 addressing, and the current IPv6 configura-
tion per-VLAN. The listing may include one or more of the
following, depending on what other IPv6 options are config-
ured on the VLAN. Any stateless address autoconfiguration
(SLAAC) commands in the configuration are also listed in the
output, but the actual addresses resulting from these
commands are not included in the output.
ipv6 enable
ipv6 address fe80::<
device-id
> link-local
ipv6 address <
prefix
>:<
device-id
>/<
prefix-length
>
ipv6 address autoconfig
ipv6 address dhcp full [rapid-commit]
ipv6 <
global-unicast-address
>/<
prefix
> anycast
4-27