HP 6125XLG R2306-HP 6125XLG Blade Switch High Availability Configuration Guide - Page 107
Displaying and maintaining track entries, Track configuration examples
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Step Command Remarks 3. Define an ACL match criterion. if-match acl acl-number By default, no packets are filtered. 4. Set the next hop, and apply ip-address next-hop [ vpn-instance associate it with a track entry. vpn-instance-name ] { ip-address [ direct ] [ track track-entry-number ] }& By default, no next hop is set. You can set two next hops for backup. The one configured earlier has a higher priority. Displaying and maintaining track entries Execute display commands in any view. Task Display information about the specified or all track entries. Command display track { track-entry-number | all } Track configuration examples VRRP-Track-NQA collaboration configuration example In this example, the master monitors the uplink. Network requirements • As shown in Figure 27, configure Host A to access Host B on the Internet. The default gateway of Host A is 10.1.1.10/24. • Switch A and Switch B belong to VRRP group 1, whose virtual IP address is 10.1.1.10. • When Switch A operates correctly, packets from Host A to Host B are forwarded through Switch A. When VRRP finds that a fault is on the uplink of Switch A through NQA, packets from Host A to Host B are forwarded through Switch B. 102