HP 6125XLG R2306-HP 6125XLG Blade Switch High Availability Configuration Guide - Page 12

Configuring errored frame period event detection

Get HP 6125XLG PDF manuals and user guides View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

To configure errored frame event detection on a port: Step 1. Enter system view. 2. Enter Ethernet interface view. 3. Configure the errored frame event detection window. 4. Configure the errored frame event triggering threshold. Command system-view interface interface-type interface-number oam errored-frame window window-value oam errored-frame threshold threshold-value Remarks N/A N/A By default, an interface uses the value configured globally. By default, an interface uses the value configured globally. Configuring errored frame period event detection An errored frame period event occurs when the number of times that frame errors in the detection window (specified number of received frames) are detected exceeds the predefined threshold. You can configure this command in system view or interface view. The configuration in system view takes effect on all ports, and the configuration in interface view takes effect on the specified port. For a port, the configuration in interface view takes precedence. To configure errored frame period event detection globally: Step 1. Enter system view. 2. Configure the errored frame period event detection window. 3. Configure the errored frame period event triggering threshold. Command system-view oam global errored-frame-period window window-value oam global errored-frame-period threshold threshold-value Remarks N/A By default, the errored frame period event detection window is 10000000. By default, the errored frame period event triggering threshold is 1. To configure errored frame period event detection on a port: Step 1. Enter system view. 2. Enter Ethernet interface view. 3. Configure the errored frame period event detection window. 4. Configure the errored frame period event triggering threshold. Command system-view interface interface-type interface-number oam errored-frame-period window window-value oam errored-frame-period threshold threshold-value Remarks N/A N/A By default, an interface uses the value configured globally. By default, an interface uses the value configured globally. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
7
To configure errored frame event detection on a port:
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter Ethernet interface view.
interface
interface-type
interface-number
N/A
3.
Configure the errored frame
event detection window.
oam errored-frame window
window-value
By default, an interface uses the
value configured globally.
4.
Configure the errored frame
event triggering threshold.
oam errored-frame threshold
threshold-value
By default, an interface uses the
value configured globally.
Configuring errored frame period event detection
An errored frame period event occurs when the number of times that frame errors in the detection window
(specified number of received frames) are detected exceeds the predefined threshold.
You can configure this command in system view or interface view. The configuration in system view takes
effect on all ports, and the configuration in interface view takes effect on the specified port. For a port,
the configuration in interface view takes precedence.
To configure errored frame period event detection globally:
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Configure the errored frame
period event detection
window.
oam global errored-frame-period
window
window-value
By default, the errored frame
period event detection window is
10000000.
3.
Configure the errored frame
period event triggering
threshold.
oam global errored-frame-period
threshold
threshold-value
By default, the errored frame
period event triggering threshold is
1.
To configure errored frame period event detection on a port:
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter Ethernet interface view.
interface
interface-type
interface-number
N/A
3.
Configure the errored frame
period event detection
window.
oam errored-frame-period
window
window-value
By default, an interface uses the
value configured globally.
4.
Configure the errored frame
period event triggering
threshold.
oam errored-frame-period
threshold
threshold-value
By default, an interface uses the
value configured globally.