HP 6125XLG R2306-HP 6125XLG Blade Switch High Availability Configuration Guide - Page 28
Con Device D as you con Device B., Con MIPs
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
[DeviceB] cfd md MD_B level 3 [DeviceB] cfd service-instance 2 ma-id vlan-based md MD_B vlan 100 Configure Device D as you configure Device B. # Create MD_B (level 3) on Device C, and create service instance 2 (in which the MA is identified by a VLAN and serves VLAN 100). [DeviceC] cfd md MD_B level 3 [DeviceC] cfd service-instance 2 ma-id vlan-based md MD_B vlan 100 4. Configure MEPs: # On Device A, configure a MEP list in service instance 1; create inward-facing MEP 1001 in service instance 1 on Ten-GigabitEthernet 1/1/5. [DeviceA] cfd meplist 1001 4002 5001 service-instance 1 [DeviceA] interface ten-gigabitethernet 1/1/5 [DeviceA-Ten-GigabitEthernet1/1/5] cfd mep 1001 service-instance 1 inbound [DeviceA-Ten-GigabitEthernet1/1/5] quit # On Device B, configure a MEP list in service instances 1 and 2; create outward-facing MEP 2001 in service instance 2 on Ten-GigabitEthernet 1/1/7. [DeviceB] cfd meplist 1001 4002 5001 service-instance 1 [DeviceB] cfd meplist 2001 4001 service-instance 2 [DeviceB] interface ten-gigabitethernet 1/1/7 [DeviceB-Ten-GigabitEthernet1/1/7] cfd mep 2001 service-instance 2 outbound [DeviceB-Ten-GigabitEthernet1/1/7] quit # On Device D, configure a MEP list in service instances 1 and 2, create outward-facing MEP 4001 in service instance 2 on Ten-GigabitEthernet 1/1/5, and then create inward-facing MEP 4002 in service instance 1 on Ten-GigabitEthernet 1/1/7. [DeviceD] cfd meplist 1001 4002 5001 service-instance 1 [DeviceD] cfd meplist 2001 4001 service-instance 2 [DeviceD] interface ten-gigabitethernet 1/1/5 [DeviceD-Ten-GigabitEthernet1/1/5] cfd mep 4001 service-instance 2 outbound [DeviceD-Ten-GigabitEthernet1/1/5] quit [DeviceD] interface ten-gigabitethernet 1/1/7 [DeviceD-Ten-GigabitEthernet1/1/7] cfd mep 4002 service-instance 1 inbound [DeviceD-Ten-GigabitEthernet1/1/7] quit # On Device E, configure a MEP list in service instance 1; create inward-facing MEP 5001 in service instance 1 on Ten-GigabitEthernet 1/1/8. [DeviceE] cfd meplist 1001 4002 5001 service-instance 1 [DeviceE] interface ten-gigabitethernet 1/1/8 [DeviceE-Ten-GigabitEthernet1/1/8] cfd mep 5001 service-instance 1 inbound [DeviceE-Ten-GigabitEthernet1/1/8] quit 5. Configure MIPs: # Configure the MIP generation rule in service instance 1 on Device B as explicit. [DeviceB] cfd mip-rule explicit service-instance 1 # Configure the MIP generation rule in service instance 2 on Device C as default. [DeviceC] cfd mip-rule default service-instance 2 6. Configure CC: # On Device A, enable the sending of CCM frames for MEP 1001 in service instance 1 on Ten-GigabitEthernet 1/1/5. 23