HP 6125XLG R2306-HP 6125XLG Blade Switch High Availability Configuration Guide - Page 11
Configuring errored symbol event detection, Command, Remarks
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Configuring errored symbol event detection An errored symbol event occurs when the number of detected symbol errors in the detection window (specified number of received symbols) exceeds the predefined threshold. You can configure this command in system view or interface view. The configuration in system view takes effect on all ports, and the configuration in interface view takes effect on the specified port. For a port, the configuration in interface view takes precedence. To configure errored symbol event detection globally: Step 1. Enter system view. 2. Configure the errored symbol event detection window. 3. Configure the errored symbol event triggering threshold. Command system-view oam global errored-symbol-period window window-value oam global errored-symbol-period threshold threshold-value Remarks N/A By default, the errored symbol event detection window is 100000000. By default, the errored symbol event triggering threshold is 1. To configure errored symbol event detection on a port: Step 1. Enter system view. Command system-view 2. Enter Ethernet interface view. interface interface-type interface-number 3. Configure the errored symbol oam errored-symbol-period event detection window. window window-value 4. Configure the errored symbol oam errored-symbol-period event triggering threshold. threshold threshold-value Remarks N/A N/A By default, an interface uses the value configured globally. By default, an interface uses the value configured globally. Configuring errored frame event detection An errored frame event occurs when the number of times that error frames in the detection window (specified detection interval) are detected exceeds the predefined threshold. You can configure this command in system view or interface view. The configuration in system view takes effect on all ports, and the configuration in interface view takes effect on the specified port. For a port, the configuration in interface view takes precedence. To configure errored frame event detection globally: Step 1. Enter system view. 2. Configure the errored frame event detection window. 3. Configure the errored frame event triggering threshold. Command Remarks system-view N/A oam global errored-frame window window-value By default, the errored frame event detection window is 1000 milliseconds. oam global errored-frame threshold threshold-value By default, the errored frame event triggering threshold is 1. 6