HP 6125XLG R2306-HP 6125XLG Blade Switch High Availability Configuration Guide - Page 41
Configuration procedure
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Figure 11 Network diagram Configuration procedure 1. Configure Device A: # Enable DLDP globally. system-view [DeviceA] dldp enable # Configure Ten-GigabitEthernet 1/1/5 to operate in full duplex mode and at 10000 Mbps, and enable DLDP on the port. [DeviceA] interface ten-gigabitethernet 1/1/5 [DeviceA-Ten-GigabitEthernet1/1/5] duplex full [DeviceA-Ten-GigabitEthernet1/1/5] speed 10000 [DeviceA-Ten-GigabitEthernet1/1/5] dldp enable [DeviceA-Ten-GigabitEthernet1/1/5] quit # Configure Ten-GigabitEthernet 1/1/6 to operate in full duplex mode and at 10000 Mbps, and enable DLDP on the port. [DeviceA] interface ten-gigabitethernet 1/1/6 [DeviceA-Ten-GigabitEthernet1/1/6] duplex full [DeviceA-Ten-GigabitEthernet1/1/6] speed 10000 [DeviceA-Ten-GigabitEthernet1/1/6] dldp enable [DeviceA-Ten-GigabitEthernet1/1/6] quit # Set the port shutdown mode to manual. [DeviceA] dldp unidirectional-shutdown manual 2. Configure Device B: # Enable DLDP globally. system-view [DeviceB] dldp global enable # Configure Ten-GigabitEthernet 1/1/5 to operate in full duplex mode and at 10000 Mbps, and enable DLDP on it. [DeviceB] interface ten-gigabitethernet 1/1/5 [DeviceB-Ten-GigabitEthernet1/1/5] duplex full [DeviceB-Ten-GigabitEthernet1/1/5] speed 10000 [DeviceB-Ten-GigabitEthernet1/1/5] dldp enable [DeviceB-Ten-GigabitEthernet1/1/5] quit # Configure Ten-GigabitEthernet 1/1/6 to operate in full duplex mode and at 10000 Mbps, and enable DLDP on it. [DeviceB] interface ten-gigabitethernet 1/1/6 [DeviceB-Ten-GigabitEthernet1/1/6] duplex full [DeviceB-Ten-GigabitEthernet1/1/6] speed 10000 36