HP 6125XLG R2306-HP 6125XLG Blade Switch High Availability Configuration Guide - Page 68
Con VLAN 3., Assign Switch B a higher priority than Switch A in VRRP group 2
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
[SwitchB-Vlan-interface2] ip address 10.1.1.2 255.255.255.128 # Create VRRP group 1, and set its virtual IP address to 10.1.1.100. [SwitchB-Vlan-interface2] vrrp vrid 1 virtual-ip 10.1.1.100 [SwitchB-Vlan-interface2] quit # Configure VLAN 3. [SwitchB] vlan 3 [SwitchB-vlan3] port ten-gigabitethernet 1/1/6 [SwitchB-vlan3] quit [SwitchB] interface vlan-interface 3 [SwitchB-Vlan-interface3] ip address 10.1.1.131 255.255.255.128 # Create VRRP group 2, and set its virtual IP address to 10.1.1.200. [SwitchB-Vlan-interface3] vrrp vrid 2 virtual-ip 10.1.1.200 # Assign Switch B a higher priority than Switch A in VRRP group 2, so Switch B can become the master in the group. [SwitchB-Vlan-interface3] vrrp vrid 2 priority 110 3. Verify the configuration: # Display detailed information about the VRRP groups on Switch A. [SwitchA-Vlan-interface3] display vrrp verbose IPv4 Virtual Router Information: Running Mode : Standard Total number of virtual routers : 2 Interface Vlan-interface2 VRID : 1 Adver Timer : 100 Admin Status : Up State : Master Config Pri : 110 Running Pri : 110 Preempt Mode : Yes Delay Time : 0 Auth Type : None Virtual IP : 10.1.1.100 Virtual MAC : 0000-5e00-0101 Master IP : 10.1.1.1 Interface Vlan-interface3 VRID : 2 Adver Timer : 100 Admin Status : Up State : Backup Config Pri : 100 Running Pri : 100 Preempt Mode : Yes Delay Time : 0 Auth Type : None Virtual IP : 10.1.1.200 Master IP : 10.1.1.131 # Display detailed information about the VRRP groups on Switch B. [SwitchB-Vlan-interface3] display vrrp verbose IPv4 Virtual Router Information: Running Mode : Standard Total number of virtual routers : 2 Interface Vlan-interface2 VRID : 1 Adver Timer : 100 Admin Status : Up State : Backup 63