HP 6125XLG R2306-HP 6125XLG Blade Switch High Availability Configuration Guide - Page 127
on Switch A., Shut down the uplink interface VLAN-interface 3 on Switch A.
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
VRID : 1 Admin Status : Up Config Pri : 110 Preempt Mode : Yes Auth Type : None Virtual IP : 10.1.1.10 Virtual MAC : 0000-5e00-0101 Master IP : 10.1.1.1 VRRP Track Information: Track Object : 1 Adver Timer State Running Pri Delay Time : 100 : Master : 110 : 0 State : Positive Pri Reduced : 30 # Display detailed information about VRRP group 1 on Switch B. [SwitchB-Vlan-interface2] display vrrp verbose IPv4 Virtual Router Information: Running Mode : Standard Total number of virtual routers : 1 Interface Vlan-interface2 VRID : 1 Adver Timer : 100 Admin Status : Up State : Backup Config Pri : 100 Running Pri : 100 Preempt Mode : Yes Delay Time : 0 Become Master : 2200ms left Auth Type : None Virtual IP : 10.1.1.10 Master IP : 10.1.1.1 The output shows that in VRRP group 1, Switch A is the master, and Switch B is a backup. Packets from Host A to Host B are forwarded through Switch A. # Shut down the uplink interface VLAN-interface 3 on Switch A. [SwitchA-Vlan-interface2] interface vlan-interface 3 [SwitchA-Vlan-interface3] shutdown After shutting down the uplink interface on Switch A, you can still successfully ping Host B on Host A. Use the display vrrp command to view information about VRRP group 1. # After shutting down the uplink interface on Switch A, display detailed information about VRRP group 1 on Switch A. [SwitchA-Vlan-interface3] display vrrp verbose IPv4 Virtual Router Information: Running Mode : Standard Total number of virtual routers : 1 Interface Vlan-interface2 VRID : 1 Adver Timer : 100 Admin Status : Up State : Backup Config Pri : 110 Running Pri : 80 Preempt Mode : Yes Delay Time : 0 Become Master : 2200ms left Auth Type : None Virtual IP : 10.1.1.10 Master IP : 10.1.1.2 VRRP Track Information: 122