HP 935 hp photosmart 930 series digital camera user manual - Page 81
Normal, Macro, Setting the focus range, Shutter, Flash, Flash On, Focus Lock, Using focus, My image is
UPC - 808736469753
View all HP 935 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Problem My image is blurry. My image is too bright. Possible cause Solution The camera was set to Normal focus when it should have been set to Macro focus, or vice versa. Set the camera to Macro focus or to Normal focus, and try taking the picture again. (See Setting the focus range on page 30.) You moved the camera while you took the picture. Hold the camera steady as you press the Shutter button or use a tripod. The light is low In dim light, the camera requires and the flash a longer exposure. Use a tripod is set to Flash to hold the camera steady, Off . improve lighting conditions, or set the flash to Flash On (see page 33). The camera Use Focus Lock. (See Using focus focused on the lock on page 27.) wrong thing, or was unable to focus. The flash provided too much light. Use the Flash Off page 33). setting (see You were too close to the subject to use the flash. Move back from the subject or use the Flash Off setting (see page 33), and take the picture again. Chapter 7: Troubleshooting and support 81