HP 9500n HP Color LaserJet 9500n/9500hdn - User Reference Guide - Page 191
roller. Remove all three rollers., Pinch the plastic tab on the end of each roller to remove
UPC - 808736429672
View all HP 9500n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
16 16 Remove the new tray rollers from their packaging. Avoid touching the rubber surface of the rollers. Note Replace all of the rollers in a tray at the same time. 17 Pull tray 2 out of the printer until it stops. Lift it up slightly and pull it out. Remove tray 3, noting which tray belongs in which 17 position. Note Do not move the blue switch at the left rear of the tray. It is not necessary to unload the paper from the tray. 18 In tray 3, locate the small roller and two large rollers to the right inside the opening. 18 19 Pinch the plastic tab on the end of each roller to remove the roller. Remove all three rollers. 20 Grasp each new roller by both sides and slide it onto the corresponding rod until the roller clicks into place. Replace the tray-2 rollers using steps 18 through 20. Note 19 Make sure that the small roller is to the left in both trays. 20 6 Managing the printer 189