HP 9500n HP Color LaserJet 9500n/9500hdn - User Reference Guide - Page 249
To Change, Move Switch In, Tray X Size=*selected
UPC - 808736429672
View all HP 9500n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
Message Description or explanation Recommended action ROTATE PAPER IN TRAY X alternates with READY Tray X is loaded with letter or A4 media in the portrait orientation, but the job that used the tray did not specify bookletmaking. The media in tray X needs to be rotated. Rotate the media or select the booklet-making option for the job. The printer will not print until this step is followed. The printer continues to print, but a message appears on the printer control panel that the print job will print faster if the media is rotated. SIZE MISMATCH TRAY =[SIZE] Tray X is loaded with media that is longer or shorter in the feed direction than the size configured for the tray. Reconfigure the tray or move the media to a tray configured for that size. STAPLER LOW ON STAPLES The stapler device is running out of staples. Replace the stapler cartridge. STAPLER OUT OF STAPLES The stapler device is out of Replace the stapler cartridge. staples and needs to be refilled. TRAY X EMPTY alternates with READY The tray is out of media. Load the empty tray (X) to clear the message. If you do not load the specified tray, the printer will continue to print from the next available tray, and the message will continue to appear. TRAY X OPEN alternates with READY The specified tray is open or is Close the specified tray. not closed completely. TRAY X SIZE=*SELECTED SIZE alternates with TO CHANGE, MOVE SWITCH IN TRAY X The custom switch is in the Move switch to the "custom" "standard" position, and a value position or reset the menu value from the menu is selected. to standard. TYPE MISMATCH TRAY X=[TYPE] The system detected a different 1 Verify that the correct type of media than the type media is loaded in the tray. specified for the tray in the 2 Check the driver settings to paper path coming from the tray make sure that the (X). expected media type is selected. 3 Check the media-type settings at the printer control panel to make sure that the printer is set for the media type that is in the tray. 4 See the printer software online help for more information. 7 Problem solving 247