HP 9650 HP Deskjet 9600 - User Guide - Page 105
I/O stall., Power light off, Resume light blinks. - service manual
UPC - 808736660075
View all HP 9650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Power light blinks twice, stays off, then repeats the pattern. Printer is cancelling a print job. No action required. x2 x2 Power light on, Resume light blinks. Power light off, Resume light blinks. Power and Resume lights blink together at same time. Check for one of the following conditions: Printer is waiting for special media to dry. Press the Resume button if you do not want to wait. You can change the dry time in the printer driver (see "Ink is smearing" for instructions). Printer is out of paper. Load paper and press the Resume button to continue the print job. Printer is waiting for a manual feed load. If using front or rear manual feed slot, load paper and press the Resume button to continue the print job. There is a media size mismatch. Make sure the paper size selected in the printer driver matches the paper size loaded in the printer. The printer has printed a banner and the banner needs to be removed from the printer. Press the Resume button to eject the banner media. I/O stall. Make sure your system is running properly and the printer is properly connected to your system. Then resend the print job. To check the system, see the guidelines in "Troubleshooting". Paper jam or paper motor stall. Clear the jammed paper (see "Clearing jams"). After clearing the jam, press the Resume button to continue the print job. If no paper jam exists, press the Resume button. If this does not work, turn off the printer, and then turn it on again. Then resend the print job. Carriage stall. If there is a paper jam, clear the jammed paper (see "Clearing jams"). After clearing the jam, press the Resume button to continue the print job. If no paper jam exists, press the Resume button. If this does not work, turn off the printer, and then turn it on again. Then resend the print job. Power and Resume lights blink alternately. Service station stall. If there is a paper jam, clear the jammed paper (see "Clearing jams"). After clearing the jam, press the Resume button to continue the print job. If no paper jam exists, press the Resume button. If this does not work, turn off the printer, and then turn it on again. Then resend the print job. 7-2 ENWW