HP Color LaserJet Managed MFP M775 User Guide - Page 192
Con fax dialing settings
View all HP Color LaserJet Managed MFP M775 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
Configure fax dialing settings 1. From the Home screen on the product control panel, scroll to and touch the Administration button. 2. Open the following menus: ● Fax Settings ● Fax Send Settings ● Fax Send Setup ● Fax Dialing Settings Configure any of the following settings: Menu item Fax Dial Volume Dialing Mode Fax Send Speed Redial Interval Redial on error Redial On Busy Redial On No Answer Detect Dial Tone Dialing Prefix Description Use the Fax Dial Volume setting to control the product's dialing volume level when sending faxes. The Dialing Mode setting sets the type of dialing that is used: either tone (touch-tone phones) or pulse (rotary-dial phones). The Fax Send Speed setting sets the modem bit rate (measured in bits per second) of the Analog Fax modem while sending a fax. ● Fast (default) - v.34/max 33,600 bps ● Medium - v.17/max 14,600 bps ● Slow - v.29/max 9,600 bps The Redial Interval setting selects the number of minutes between retries if the number dialed is busy or not answering, or if an error occurs. NOTE: You might observe a redial message on the control panel when both the Redial On Busy and Redial On No Answer settings are set to off. This occurs when the fax accessory dials a number, establishes a connection, and then loses the connection. As a result of this error condition, the fax accessory performs three automatic redial attempts regardless of the redial settings. During this redial operation, a message displays on the control panel to indicate that a redial is in progress. The Redial on error feature sets the number of times a fax number will be redialed when an error occurs during a fax transmission. The Redial On Busy setting selects the number of times (0 through 9) the fax accessory redials a number when the number is busy. The interval between retries is set by the Redial Interval setting. The Redial On No Answer setting selects the number of times the fax accessory redials if the number dialed does not answer. The number of retries is either 0 to 1 (used in the U.S.) or 0 to 2, depending on the country/region setting. The interval between retries is set by the redial interval setting. The Detect Dial Tone setting determines whether the fax checks for a dial tone before sending a fax. The Dialing Prefix setting allows you to enter a prefix number (such as a "9" to access an outside line) when dialing. This prefix number is automatically added to all phone numbers when dialed. 178 Chapter 8 Fax ENWW