HP Color LaserJet Managed MFP M775 User Guide - Page 65
Standard output bin, Stapler/stacker (z and z+ models only
View all HP Color LaserJet Managed MFP M775 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Standard output bin The standard output bin holds up to 500 sheets of 75 g/m2 (20 lb) paper. Stapler/stacker (z and z+ models only) The stapler/stacker can staple jobs of up to 30 sheets of 75 g/m2 (20 lb) paper. It can stack up to 500 sheets of paper. The stapler can staple these sizes: ● A3 (portrait orientation) ● A4 ● B4 (portrait orientation) ● B5 (landscape orientation) ● Ledger (portrait orientation) ● Legal (portrait orientation) ● Letter Paper weight can range from 60 to 120 g/m2 (16 to 32 lb). Heavier paper might have a stapling limit of fewer than 30 sheets. If the job consists of only one sheet, or if it consists of more than 30 sheets, the product delivers the job to the bin, but the product does not staple the job. The stapler supports paper only. Do not try to staple other types of paper, such as envelopes, transparencies, or labels. To configure the default location where the product places the staples on the pages, follow this procedure: 1. From the Home screen on the product control panel, scroll to and touch the Administration button. 2. Open the following menus: ● Stapler Stacker Settings ● Stapling 3. Select a staple location from the list of options, and then touch the Save button. The following options are available: ● None ● Top left or right NOTE: For documents with portrait orientation, the staple is in the upper-left corner. For documents with landscape orientation, the staple is in the upper-right corner. ● Top left ● Top right ENWW Standard output bin 51