HP Integrity Superdome SX1000 SmartSetup Scripting Toolkit Deployment Guide: H - Page 31

rhel-setup.sh sles-setup.sh This script edits the configuration in the RHEL unattended configuration file and copies the RHEL boot image files to the ESP partition. This script edits the configuration in the SLES unattended configuration file, and copies the SLES boot image files to the ESP partition. • The utilities directory contains the following files: cfggen The RAID configuration utility for LSI controllers; it is a counterpart of cpqacuxe. In SSTK it is used for applying RAID 1 in LSI 1068 controllers. efivar A generic tool used to set EFI variables from the SSTK LinuxPE. getuuid This utility retrieves the Universally Unique ID (UUID) used to identify a storage device or a single partition. hplpcfg The HP Emulex HBA configuration utility. hpqlarep The HP QLogic HBA configuration utility. hpshowdisk This utility gathers storage device information such as disk size, device node, controller type and target LUN including HBA WWID, and the target port WWN for disks in a SAN environment. allboards.xml Used by the hwquery and ifhw utilities to convert PCI device IDs found in hardware discovery into device names. conrep The configuration replication utility, which reads EFI variables from the model server and records them in the conrep.dat file. conrep.xml cpqacuxe efibootmgr hpacucli A utility that includes a list of EFI variables, which determine what data to retrieve from the server. You can edit this file to control the data collection. The array configuration utility, which operates in two modes. In the capture mode, it reads the configuration of a storage array controller and records it in a configuration file. In the input mode, it writes the configuration to the target server. This archive is extracted to /sbin/ cpqacuxe and a structure under /opt/compaq/cpqacuxe. The EFI boot manager utility, which loads EFI applications (such as the OS boot loader) and EFI drivers. The EFI boot manager allows you to control the server's boot environment using variables stored in NVRAM. The HP Array Configuration Utility Command Line Interface (HP ACU-CLI) is a command-line based disk configuration tool that can be used to configure and manage Smart Array Controllers and RAID Array Controllers in Integrity Linux environments. hpia64info hwdisc hwquery The hpia64info utility, which displays information about Management Processor and system firmware. The hardware discovery utility, which creates an inventory of the server and writes this data to a file. The hardware query utility, which reads the file created by the hardware discovery utility and provides this data in a usable form. ifhw The if hardware utility, which makes user process decisions based on data from the file created by the hardware discovery utility. Unpacking the Toolkit 31