HP Integrity Superdome SX1000 SmartSetup Scripting Toolkit Deployment Guide: H - Page 65

Table 6-8 Error Codes (continued) Code Error Reason 2837 New Logical Drive ID already exists When running in Configure mode, this error occurs when the Logical Drive ID in the script file already exists in the configuration. Configure mode can only create new logical drives. 2838 Cannot create Logical Drive The controller does not allow a new logical drive to be created. This could be because there is no free space on the array, or the maximum number of logical drives has already been reached. 2839 Cannot migrate Logical Drive Raid The controller does not support migration, or the current configuration of the controller does not allow migration to occur. 2840 Cannot migrate Logical Drive Stripe Size The controller does not support migration, or the current configuration of the controller does not allow migration to occur. 2841 Cannot extend Logical Drive The controller does not support extension, or the current configuration of the controller does not allow extension to occur. For example, there might be no free space on an array, so extension is not supported for the logical drive. 2842 Invalid Raid The specified RAID is invalid or is not possible with the current configuration. 2843 Invalid Size The specified size is invalid or is not possible with the current configuration. 2844 Invalid Stripe Size The specified stripe size is invalid, is not supported with the current RAID level, or is not supported with the current configuration. 2846 Cannot change Logical Drive Sectors You cannot change the max boot on a configured logical drive. This leads to data loss. 2845 Invalid Sectors The specified Max Boot setting is invalid, or is not supported with the current configuration. 2848 Cannot change Logical Drive Array Accelerator Setting The current controller configuration does not support changing the logical drive Array Accelerator state. 2847 Invalid Array Accelerator Setting The specified Array Accelerator setting is invalid or is not supported with the current configuration. 290 Error communicating with Controller There was a problem communicating with one or more controllers. 278-282, Controller is locked by another One or more controllers is locked by another machine or user. 2564 machine or user 268 Error saving Controller There was a problem saving one or more controller configurations. 1065-1066 Too many coinciding expansion, migration, or extension operations This error is the "invalid increase/decrease" in logical drive offset error. This can happen when too many unsaved expansions, extensions, or migrations are tried at the same time. 1110 Controller does not support license keys The controller does not support license key entry or deletion. 1093 Controller requires physical drives to set license keys The controller requires physical drives for license keys. cpqacuxe 65