HP LH4r HP Netserver DiagTools v1.0x User Guide - Page 40
Run Configuration Assistant from the Navigator CD-ROM.
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Chapter 5 Error Message Reference Code 0088h Description BIOS32 service directory integrity check failed. Recommended Action 8. If the system ran with temperature high, let it cool for 30 minutes, then restart. 9. If system repeatedly shows this error, replace PCI Card and system board. Update the System BIOS. 0089h 008Ah 0090h 0091h 0094h 0095h 0096h PCI bus transfer using standard PCI cycles failed. BCI bus transfer using PCI bus master cycles failed. PnP function 00 failed. PnP Function 01 failed. Number of system device nodes is not same as reported. One or more nodes have larger than reported size. ISA bus detected 1. Remove all unnecessary PCI cards and try the test again. If it still fails, make sure all PCI connectors are seated. 2. Make sure the system board is seated. 3. Check the seating of the voltage regulator module (VRM) if present. 4. Be sure the processor board (if any) is seated. 5. Make sure the CPU chip is seated. (Take ESD precautions.) 6. Make sure the memory elements (DIMMs) are properly seated. 7. Check system fans. If overheating occurs, chip may shut down. 8. If the system ran with temperature high, let it cool for 30 minutes, then restart. 9. If system repeatedly shows this error, replace PCI Card and system board. 1. Remove all unnecessary PCI cards and try the test again. If it still fails, make sure all PCI connectors are seated. 2. Make sure the system board is seated. 3. Check the seating of the voltage regulator module (VRM) if present. 4. Be sure the processor board (if any) is seated. 5. Make sure the CPU chip is seated. (Take ESD precautions.) 6. Make sure the memory elements (DIMMs) are properly seated. 7. Check system fans. If overheating occurs, chip may shut down. 8. If the system ran with temperature high, let it cool for 30 minutes, then restart. 9. If system repeatedly shows this error, replace PCI Card and system board. 1. Clear CMOS per instructions on technical reference label or card. 2. Run Configuration Assistant from the Navigator CD-ROM. 3. Check BIOS version and update the BIOS. 4. Change the system boards. 1. Clear CMOS per instructions on technical reference label or card. 2. Run Configuration Assistant from the Navigator CD-ROM. 3. Check BIOS version and update the BIOS. 4. Change the system boards. 1. Clear CMOS per instructions on technical reference label or card. 2. Run Configuration Assistant from the Navigator CD-ROM. 3. Check BIOS version and update the BIOS. 4. Change the system boards.. 1. Clear CMOS per instructions on technical reference label or card. 2. Run Configuration Assistant from the Navigator CD-ROM. 3. Check BIOS version and update the BIOS. 4. Change the system boards. Replace System BIOS. 36