HP LH4r HP Netserver DiagTools v1.0x User Guide - Page 53
FDD Flexible Disk Drive or Floppy Tests
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Chapter 5 Error Message Reference FDD (Flexible Disk Drive or Floppy) Tests Flexible Disk Drives are tested for rotational speed, elevator, and seek channel. Code 0301h 0302h 0303h 0304h 0305h 0307h 0308h 0309h 030Ah 0310h 0311h 0321h Description Undefined or invalid command. DiagTools Error DiagTools Error DiagTools Error Reset failed. DiagTools issued a reset command and it was not accepted or confirmed by the floppy disk controller. Drive parameter activity failed. DMA Overrun error. Attempt to DMA at 64 KB boundary. DiagTools Error Floppy CRC or ECC data error. DiagTools Error The circuit that detects changed diskettes is not working. Recommended Action 1. Try a different diskette. 2. Check the cable between the floppy drive and the system board. 3. Change the floppy drive. 4. Change the system board. Download a new version of DiagTools from the HP web site and run it. If you get the same error, call the HP Customer Care Center. Download a new version of DiagTools from the HP web site and run it. If you get the same error, call the HP Customer Care Center. Download a new version of DiagTools from the HP web site and run it. If you get the same error, call the HP Customer Care Center. 1. Try a different diskette. 2. Check the cable between the floppy drive and the system board. 3. Change the floppy drive. 4. Change the system board. 1. Try a different diskette. 2. Check the cable between the floppy and the system board. 3. Change the floppy drive. 4. Change the system board. 1. Try a different diskette. 2. Check the cable between the floppy and the system board. 3. Change the floppy drive. 4. Change the system board. 1. Try a different diskette. 2. Check the cable between the floppy and the system board. 3. Change the floppy drive. 4. Change the system board. Download a new version of DiagTools from the HP web site and run it. If you get the same error, call the HP Customer Care Center. 1. Try a different diskette. 2. Check the cable between the floppy drive and the system board. 3. Change the floppy drive. 4. Change the system board. Download a new version of DiagTools from the HP web site and run it. If you get the same error, call the HP Customer Care Center. 1. Try a different diskette. 2. Check the cable between the floppy drive and the system board. 3. Change the floppy drive. 4. Change the system board. 49