HP LH4r HP Netserver DiagTools v1.0x User Guide - Page 81
Serial Port, Parallel Port, Video Memory Test, IDE CD Data Test - printers
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Appendix B Test Descriptions Serial Port A maximum of four serial ports (COM1 through COM4) are tested. All parameters i.e. number of data bits, number of stop bits, parity type etc. can be individually selected for each port. The tests that are performed on the serial ports include: Register test, Interrupt ID test, Internal loopback test, Line status test, Modem control register test, Data transfer test (at baud rates from 300 BPS to 115.2KBPS and FIFO test. Parallel Port A maximum of three parallel ports (LPT1 through LPT3) are tested. The test parameter window asks the user whether a printer or a loopback plug is connected. If these are not connected, only the register read/write test is performed. Otherwise, the following tests are performed: Register test, IRQ activation test, Pattern printing, Bold letter printing, Compressed mode printing, Printer form feed test, and ECP test. Video Test The Video Test Menu includes functional exercising of the video memory. Video Memory Test The Video Memory Test checks the base 256k of video memory for integrity by performing a memory pattern test. IDE CD-ROM The IDE Tests include exercising of the CD-ROM tray response, data, and audio if present. IDE CD Data Test This test reads logical blocks from the CDROM. If the starting logical block number and end logical block number fields are not specified, the test starts reading from block 0 and terminates at the last block of CDROM. This test will fail if an audio CD is inserted inside the drive. 77