HP LH4r HP Netserver DiagTools v2.0 User Guide - Page 38

Run Configuration Assistant from the Navigator CD-ROM.

Get HP LH4r - NetServer - 256 MB RAM PDF manuals and user guides View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Chapter 5 Error Message Reference Code 008Ah 0090h 0091h 0094h 0095h 0096h Description BCI bus transfer using PCI bus master cycles failed. PnP function 00 failed. PnP Function 01 failed. Number of system device nodes is not same as reported. One or more nodes have larger than reported size. ISA bus detected twice. Recommended Action 8. If the system ran with temperature high, let it cool for 30 minutes, then restart. 9. If system repeatedly shows this error, replace PCI Card and system board. 1. Remove all unnecessary PCI cards and try the test again. If it still fails, make sure all PCI connectors are seated. 2. Make sure the system board is seated. 3. Check the seating of the voltage regulator module (VRM) if present. 4. Be sure the processor board (if any) is seated. 5. Make sure the CPU chip is seated. (Take ESD precautions.) 6. Make sure the memory elements (DIMMs) are properly seated. 7. Check system fans. If overheating occurs, chip may shut down. 8. If the system ran with temperature high, let it cool for 30 minutes, then restart. 9. If system repeatedly shows this error, replace PCI Card and system board. 1. Clear CMOS per instructions on technical reference label or card. 2. Run Configuration Assistant from the Navigator CD-ROM. 3. Check BIOS version and update the BIOS. 4. Change the system boards. 1. Clear CMOS per instructions on technical reference label or card. 2. Run Configuration Assistant from the Navigator CD-ROM. 3. Check BIOS version and update the BIOS. 4. Change the system boards. 1. Clear CMOS per instructions on technical reference label or card. 2. Run Configuration Assistant from the Navigator CD-ROM. 3. Check BIOS version and update the BIOS. 4. Change the system boards.. 1. Clear CMOS per instructions on technical reference label or card. 2. Run Configuration Assistant from the Navigator CD-ROM. 3. Check BIOS version and update the BIOS. 4. Change the system boards. Replace System BIOS. 0097h 0098h 0099h 009Ah DiagTools Error DiagTools Error DiagTools Error PnP function 40 failed. Download a new version of DiagTools from the HP web site and run it. If you get the same error, call the HP Customer Care Center. Download a new version of DiagTools from the HP web site and run it. If you get the same error, call the HP Customer Care Center. Download a new version of DiagTools from the HP web site and run it. If you get the same error, call the HP Customer Care Center. Replace System BIOS. 009Bh Invalid number of PnP cards. Update System BIOS. 009Ch One or more Check all PnP devices. 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
Chapter 5
Error Message Reference
34
Code
Description
Recommended Action
8. If the system ran with temperature high, let it cool for 30 minutes, then restart.
9. If system repeatedly shows this error, replace PCI Card and system board.
008Ah
BCI bus transfer
using PCI bus
master cycles failed.
1. Remove all unnecessary PCI cards and try the test again. If it still fails, make
sure all PCI connectors are seated.
2. Make sure the system board is seated.
3. Check the seating of the voltage regulator module (VRM) if present.
4. Be sure the processor board (if any) is seated.
5. Make sure the CPU chip is seated. (Take ESD precautions.)
6. Make sure the memory elements (DIMMs) are properly seated.
7. Check system fans. If overheating occurs, chip may shut down.
8. If the system ran with temperature high, let it cool for 30 minutes, then restart.
9. If system repeatedly shows this error, replace PCI Card and system board.
0090h
PnP function 00
failed.
1. Clear CMOS per instructions on technical reference label or card.
2. Run Configuration Assistant from the Navigator CD-ROM.
3. Check BIOS version and update the BIOS.
4. Change the system boards.
0091h
PnP Function 01
failed.
1. Clear CMOS per instructions on technical reference label or card.
2. Run Configuration Assistant from the Navigator CD-ROM.
3. Check BIOS version and update the BIOS.
4. Change the system boards.
0094h
Number of system
device nodes is not
same as reported.
1. Clear CMOS per instructions on technical reference label or card.
2. Run Configuration Assistant from the Navigator CD-ROM.
3. Check BIOS version and update the BIOS.
4. Change the system boards..
0095h
One or more nodes
have larger than
reported size.
1. Clear CMOS per instructions on technical reference label or card.
2. Run Configuration Assistant from the Navigator CD-ROM.
3. Check BIOS version and update the BIOS.
4. Change the system boards.
0096h
ISA bus detected
twice.
Replace System BIOS.
0097h
DiagTools Error
Download a new version of DiagTools from the HP web site and run it. If you get
the same error, call the HP Customer Care Center.
0098h
DiagTools Error
Download a new version of DiagTools from the HP web site and run it. If you get
the same error, call the HP Customer Care Center.
0099h
DiagTools Error
Download a new version of DiagTools from the HP web site and run it. If you get
the same error, call the HP Customer Care Center.
009Ah
PnP function 40
failed.
Replace System BIOS.
009Bh
Invalid number of
PnP cards.
Update System BIOS.
009Ch
One or more
Check all PnP devices.