HP LaserJet Pro M1530 HP LaserJet Pro M1530 - User Guide - Page 180

The Fax is busy message appears, A fax is received but does not print

Page 180 highlights

● Make sure that the resolution of the sending fax machine is not set to the Photo setting or the Superfine setting. a. Open the Setup menu. b. Open the Fax Setup menu. c. Open the Advanced Setup menu. d. Open the Fax Resolution menu. e. Select the correct setting. ● Cancel all fax jobs or clear the faxes from memory. The Fax is busy message appears ● The product cannot receive a fax while attempting to send one. Cancel the fax send and try sending at a later time. ● Allow the product to try sending the fax again. A fax is received but does not print The Private Receive feature is on ● When the Private Receive feature is activated, received faxes are stored in memory. A personal identification number (PIN) or password is required to print the stored faxes. ● Enter the PIN or password to print the fax. If you do not know the PIN or password, contact the product administrator. NOTE: Memory errors might occur if the faxes are not printed. The product will not answer if the memory is full. The Receive to PC feature is enabled ● Make sure that the Receive to PC option is set up. You must use HP Toolbox software to configure the feature. a. At the computer, open HP ToolboxFX. b. Select the product. c. Click Fax. d. Click Fax Tasks. e. Under Fax Receive Mode, select Receive faxes to this computer. ● Check communication with the product. 166 Chapter 10 Fax ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286

Make sure that the resolution of the sending fax machine is not set to the
Photo
setting or the
Superfine
setting.
a.
Open the
Setup
menu.
b.
Open the
Fax Setup
menu.
c.
Open the
Advanced Setup
menu.
d.
Open the
Fax Resolution
menu.
e.
Select the correct setting.
Cancel all fax jobs or clear the faxes from memory.
The Fax is busy message appears
The product cannot receive a fax while attempting to send one. Cancel the fax send and try sending
at a later time.
Allow the product to try sending the fax again.
A fax is received but does not print
The Private Receive feature is on
When the
Private Receive
feature is activated, received faxes are stored in memory. A personal
identification number (PIN) or password is required to print the stored faxes.
Enter the PIN or password to print the fax. If you do not know the PIN or password, contact the
product administrator.
NOTE:
Memory errors might occur if the faxes are not printed. The product will not answer if the
memory is full.
The Receive to PC feature is enabled
Make sure that the
Receive to PC
option is set up. You must use HP Toolbox software to configure
the feature.
a.
At the computer, open HP ToolboxFX.
b.
Select the product.
c.
Click
Fax
.
d.
Click
Fax Tasks
.
e.
Under
Fax Receive Mode
, select
Receive faxes to this computer
.
Check communication with the product.
166
Chapter 10
Fax
ENWW