HP LaserJet Pro M1530 HP LaserJet Pro M1530 - User Guide - Page 223
Error, Turn off then on, X Fuser Error, Scanner Error, Fan Error - error 49
View all HP LaserJet Pro M1530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
Control panel message 49 Error Turn off then on 50.X Fuser Error Turn off then on 52 Scanner Error Turn off then on 57 Fan Error ENWW Description Recommended action The product has experienced a firmware error. 1. Turn off the power by using the power switch. 2. If a surge protector is being used, remove it. Plug the product directly into the wall socket. 3. Wait at least 30 seconds, and then turn on the power and wait for the product to initialize. 4. If the error persists, contact HP. See www.hp.com/support/ljm1530series or the support flyer that came in the product box. The product has experienced an internal hardware error. 1. Turn off the power by using the power switch. 2. If a surge protector is being used, remove it. Plug the product directly into the wall socket. 3. Wait at least 25 minutes, and then turn on the power and wait for the product to initialize. 4. If the error persists, contact HP. See www.hp.com/support/ljm1530series or the support flyer that came in the product box. The product has experienced a scanner error. 1. Turn off the power by using the power switch. 2. If a surge protector is being used, remove it. Plug the product directly into the wall socket. 3. Wait at least 30 seconds, and then turn on the power and wait for the product to initialize. 4. If the error persists, contact HP. See www.hp.com/support/ljm1530series or the support flyer that came in the product box. The product experienced a general fan error. 1. Turn off the power by using the power switch. 2. If a surge protector is being used, remove it. Plug the product directly into the wall socket. 3. Wait at least 30 seconds, and then turn on the power and wait for the product to initialize. 4. If the error persists, contact HP. See www.hp.com/support/ljm1530series or the support flyer that came in the product box. Interpret control panel messages 209