HP MSA 1040 HP MSA Events Description Reference Guide (762785-001, March 2014) - Page 23

HP MSA 1040 Manual

Get HP MSA 1040 PDF manuals and user guides View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

168 Error The indicated SES alert condition was detected in the indicated enclosure. This event is logged as Error severity when one of the power supplies in an enclosure has no power supplied to it or when a hardware failure is detected. Recommended actions • Check that all modules in the enclosure are fully seated in their slots and that their latches are locked. • If the reported problem is with a power supply, perform these checks: • Check that each power supply module has its switch turned on (if equipped with a switch). • Check that each power cable is firmly plugged into both the power supply and a functional electrical outlet. • If the reported problem is with a temperature sensor or fan or power supply, perform these checks: • Check that all of the enclosure's fans are running. • Check that the ambient temperature is not too warm. The enclosure operating range is 5-40C (41-104F). • Check for any obstructions to the airflow. • Check that there is a module or blank plate in every module slot in the enclosure. • If none of the above resolve the issue, the indicated FRU has probably failed and should be replaced. The failed FRU will probably have an amber LED lit. When the problem is resolved, event 169 is logged. Warning The indicated SES alert condition was detected in the indicated enclosure. Recommended actions • Check that all modules in the enclosure are fully seated in their slots and that their latches are locked. • If the reported problem is with a power supply, perform these checks: • Check that each power supply module has its switch turned on (if equipped with a switch). • Check that each power cable is firmly plugged into both the power supply and a functional electrical outlet. • If the reported problem is with a temperature sensor or fan or power supply, perform these checks: • Check that all of the enclosure's fans are running. • Check that the ambient temperature is not too warm. The enclosure operating range is 5-40C (41-104F). • Check for any obstructions to the airflow. • Check that there is a module or blank plate in every module slot in the enclosure. • If none of the above resolve the issue, the indicated FRU has probably failed and should be replaced. The failed FRU will probably have an amber LED lit. When the problem is resolved, event 169 is logged. Info. The indicated SES alert condition was detected in the indicated enclosure. Recommended actions • No action is required. 169 Info. The indicated SES alert condition has been cleared in the indicated enclosure. This event indicates that a problem reported by event 168 is resolved. Recommended actions • No action is required. Event descriptions 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Event descriptions
23
168
Error
The indicated SES alert condition was detected in the indicated enclosure. This event is logged as Error
severity when one of the power supplies in an enclosure has no power supplied to it or when a hardware
failure is detected.
Recommended actions
•
Check that all modules in the enclosure are fully seated in their slots and that their latches are locked.
•
If the reported problem is with a power supply, perform these checks:
•
Check that each power supply module has its switch turned on (if equipped with a switch).
•
Check that each power cable is firmly plugged into both the power supply and a functional
electrical outlet.
•
If the reported problem is with a temperature sensor or fan or power supply, perform these checks:
•
Check that all of the enclosure's fans are running.
•
Check that the ambient temperature is not too warm. The enclosure operating range is 5
–40
C
(41
–104
F).
•
Check for any obstructions to the airflow.
•
Check that there is a module or blank plate in every module slot in the enclosure.
•
If none of the above resolve the issue, the indicated FRU has probably failed and should be replaced.
The failed FRU will probably have an amber LED lit.
When the problem is resolved, event 169 is logged.
Warning
The indicated SES alert condition was detected in the indicated enclosure.
Recommended actions
•
Check that all modules in the enclosure are fully seated in their slots and that their latches are locked.
•
If the reported problem is with a power supply, perform these checks:
•
Check that each power supply module has its switch turned on (if equipped with a switch).
•
Check that each power cable is firmly plugged into both the power supply and a functional
electrical outlet.
•
If the reported problem is with a temperature sensor or fan or power supply, perform these checks:
•
Check that all of the enclosure's fans are running.
•
Check that the ambient temperature is not too warm. The enclosure operating range is 5
–40
C
(41
–104
F).
•
Check for any obstructions to the airflow.
•
Check that there is a module or blank plate in every module slot in the enclosure.
•
If none of the above resolve the issue, the indicated FRU has probably failed and should be replaced.
The failed FRU will probably have an amber LED lit.
When the problem is resolved, event 169 is logged.
Info.
The indicated SES alert condition was detected in the indicated enclosure.
Recommended actions
•
No action is required.
169
Info.
The indicated SES alert condition has been cleared in the indicated enclosure. This event indicates that a
problem reported by event 168 is resolved.
Recommended actions
•
No action is required.