HP MSA 1040 HP MSA Events Description Reference Guide (762785-001, March 2014) - Page 9

Error, Warning, Info.

Get HP MSA 1040 PDF manuals and user guides View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

21 Error Vdisk verification completed. Errors were found but not corrected. Recommended actions • Perform a vdisk scrub to find and correct the errors. Warning Vdisk verification did not complete because of an internally detected condition such as a failed disk. If a disk fails, data may be at risk. Recommended actions • Resolve any non-disk hardware problems, such as a cooling problem or a faulty controller module, expansion module, or power supply. • Check whether any disks in the vdisk have logged SMART events or unrecoverable read errors. • If so, and the vdisk is a non-fault-tolerant RAID level (RAID 0 or non-RAID), copy the data to a different vdisk and replace the faulty disks. • If so, and the vdisk is a fault-tolerant RAID level, replace the faulty disks. Before replacing a disk, confirm that a reconstruction is not currently running on the vdisk. It is also recommended to make a full backup of all the data in the vdisk before replacing disks. If more than one disk in the vdisk has errors, replace the disks one at a time and allow reconstruction to complete after each disk is replaced. Info. Vdisk verification failed immediately, was aborted by a user, or succeeded. Recommended actions • No action is required. 23 Info. Vdisk creation has started. Recommended actions • No action is required. 25 Info. The statistics for the indicated vdisk have been reset. Recommended actions • No action is required. 28 Info. Controller parameters have been changed. This event is logged when general configuration changes are made; for example, utility priority, remote notification settings, user interface passwords, and network port IP values. This event is not logged when changes are made to vdisk or volume configuration. Recommended actions • No action is required. 31 Info. The indicated disk is no longer a global or dedicated spare. Recommended actions • No action is required. Event descriptions 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Event descriptions
9
21
Error
Vdisk verification completed. Errors were found but not corrected.
Recommended actions
•
Perform a vdisk scrub to find and correct the errors.
Warning
Vdisk verification did not complete because of an internally detected condition such as a failed disk.
If a disk fails, data may be at risk.
Recommended actions
•
Resolve any non-disk hardware problems, such as a cooling problem or a faulty controller module,
expansion module, or power supply.
•
Check whether any disks in the vdisk have logged SMART events or unrecoverable read errors.
•
If so, and the vdisk is a non-fault-tolerant RAID level (RAID 0 or non-RAID), copy the data to a
different vdisk and replace the faulty disks.
•
If so, and the vdisk is a fault-tolerant RAID level, replace the faulty disks. Before replacing a disk,
confirm that a reconstruction is not currently running on the vdisk. It is also recommended to make
a full backup of all the data in the vdisk before replacing disks. If more than one disk in the vdisk
has errors, replace the disks one at a time and allow reconstruction to complete after each disk is
replaced.
Info.
Vdisk verification failed immediately, was aborted by a user, or succeeded.
Recommended actions
•
No action is required.
23
Info.
Vdisk creation has started.
Recommended actions
•
No action is required.
25
Info.
The statistics for the indicated vdisk have been reset.
Recommended actions
•
No action is required.
28
Info.
Controller parameters have been changed.
This event is logged when general configuration changes are made; for example, utility priority, remote
notification settings, user interface passwords, and network port IP values. This event is not logged when
changes are made to vdisk or volume configuration.
Recommended actions
•
No action is required.
31
Info.
The indicated disk is no longer a global or dedicated spare.
Recommended actions
•
No action is required.