HP MSA 1040 HP MSA Events Description Reference Guide (762785-001, March 2014) - Page 76
Logical Unit Number
![]() |
View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
host host port host bus adapter image ID initiator I/O Manager I/O module intrinsic methods IOM IQN iSCSI iSNS JBOD jumbo frame large form factor LBA leftover LFF LIP lock key logical block address Logical Unit Number loop Loop Initialization Primitive LUN MAC address Management Controller Management Information Base map/mapping An external port that the storage system is attached to. The external port may be a port in an I/O adapter in a server, or a port in a network switch. Product interfaces use the terms host and initiator interchangeably. A port on a controller module that interfaces to a host computer, either directly or through a network switch. See HBA. A globally unique serial number that identifies the point-in-time image source for a volume. All volumes that have identical image IDs have identical data content, whether they be snapshots or stand-alone volumes. See host. A MIB-specific term for a controller module. See IOM. Methods inherited from CIM and present in all classes such as getclass, createinstance, enumerateinstances, and associatorNames in SMI-S. Input/output module. An IOM can be either a controller module or an expansion module. iSCSI Qualified Name. Internet SCSI interface protocol. Internet Storage Name Service. "Just a bunch of disks." See drive enclosure. In an iSCSI network, a frame that can contain 9000 bytes for large data transfers. A normal frame can contain 1500 bytes. See LFF. Logical Block Address. The address used for specifying the location of a block of data. The state of a disk that the system has excluded from a vdisk because the timestamp in the disk's metadata is older than the timestamp of other disks in the vdisk, or because the disk was not detected during a rescan. A leftover disk cannot be used in another vdisk until the disk's metadata is cleared; for information and cautions about doing so, see documentation topics about clearing disk metadata. Large form factor. A type of disk drive. Loop Initialization Primitive. An FC primitive used to determine the loop ID for a controller. A system-generated value that manages the encryption and decryption of data on FDE-capable disks. See also FDE and passphrase. See LBA. See LUN. See FC-AL. See LIP. Logical Unit Number. A number that identifies a mapped volume to a host. Media Access Control Address. A unique identifier assigned to network interfaces for communication on a network. See MC. See MIB. Settings that specify whether a volume is presented as a storage device to a host, and how the host can access the volume. Mapping settings include an access type (read-write, read-only, or no access), controller host ports through which initiators may access the volume, and a LUN that identifies the volume to the host. See also default mapping, explicit mapping, and masking. 76 Glossary
![](/manual_guide/products/hewlettpackard-msa-1040-hp-msa-events-description-reference-guide-762785001-2014-c70e5ec/76.png)