HP MSA 1040 HP MSA Events Description Reference Guide (762785-001, March 2014) - Page 43

Info., Error, Critical, Warning

Page 43 highlights

312 Info. This event is used by email messages and SNMP traps when testing notification settings. This event is not recorded in the event log. Recommended actions • No action is required. 313 Error The indicated controller module has failed. This event can be ignored for a single-controller configuration. Recommended actions • It this is a dual-controller system, replace the failed controller module. The module's Fault/Service Required LED will be illuminated (not blinking). 314 Error The indicated FRU has failed or is not operating correctly. This event follows some other FRU-specific event indicating a problem. Recommended actions • To determine whether the FRU needs to be replaced, see the topic about verifying component failure in the component's replacement instructions document. 315 Critical The controller module is incompatible with the enclosure. The controller will automatically shut down. If two incompatible controllers are inserted at the same time or booted at the same time, one controller will crash and the other will hang. This behavior is expected and prevents data loss. Recommended actions • Move the controller module to a compatible enclosure. 316 Warning The temporary license for a feature has expired. Any components created with the feature remain accessible but new components cannot be created. Recommended actions • To continue using the feature, purchase a permanent license. Info. The temporary license for a feature will expire in 10 days. Any components created with the feature will remain accessible but new components cannot be created. Recommended actions • To continue using the feature after the trial period, purchase a permanent license. 317 Error A serious error has been detected on the Storage Controller's disk interface. The controller will be killed by its partner. Recommended actions • Visually trace the cabling between the controller modules and expansion modules. • If the cabling is OK, replace the controller module that logged this event. • If the problem recurs, replace the expansion module that is connected to the controller module. • See "Resources for diagnosing and resolving problems" (page 5). Event descriptions 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

Event descriptions
43
312
Info.
This event is used by email messages and SNMP traps when testing notification settings. This event is not
recorded in the event log.
Recommended actions
No action is required.
313
Error
The indicated controller module has failed. This event can be ignored for a single-controller configuration.
Recommended actions
It this is a dual-controller system, replace the failed controller module. The module’s Fault/Service
Required LED will be illuminated (not blinking).
314
Error
The indicated FRU has failed or is not operating correctly. This event follows some other FRU-specific event
indicating a problem.
Recommended actions
To determine whether the FRU needs to be replaced, see the topic about verifying component failure in
the component's replacement instructions document.
315
Critical
The controller module is incompatible with the enclosure.
The controller will automatically shut down. If two incompatible controllers are inserted at the same time or
booted at the same time, one controller will crash and the other will hang. This behavior is expected and
prevents data loss.
Recommended actions
Move the controller module to a compatible enclosure.
316
Warning
The temporary license for a feature has expired.
Any components created with the feature remain accessible but new components cannot be created.
Recommended actions
To continue using the feature, purchase a permanent license.
Info.
The temporary license for a feature will expire in 10 days. Any components created with the feature will
remain accessible but new components cannot be created.
Recommended actions
To continue using the feature after the trial period, purchase a permanent license.
317
Error
A serious error has been detected on the Storage Controller's disk interface. The controller will be killed
by its partner.
Recommended actions
Visually trace the cabling between the controller modules and expansion modules.
If the cabling is OK, replace the controller module that logged this event.
If the problem recurs, replace the expansion module that is connected to the controller module.
See
“Resources for diagnosing and resolving problems” (page 5)
.