HP MSA 1040 HP MSA Events Description Reference Guide (762785-001, March 2014) - Page 38
While cleaning up resources in metadata at the end of a volume-copy operation, the firmware found
![]() |
View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
259 Info. In-band CAPI commands have been disabled. Recommended actions • No action is required. 260 Info. In-band CAPI commands have been enabled. Recommended actions • No action is required. 261 Info. In-band SES commands have been disabled. Recommended actions • No action is required. 262 Info. In-band SES commands have been enabled. Recommended actions • No action is required. 263 Warning The indicated spare disk is missing. Either it was removed or it is not responding. Recommended actions • Replace the disk with one of the same type (SAS SSD, enterprise SAS, or midline SAS) and the same or greater capacity. • Configure the disk as a spare. 266 Info. A volume-copy operation for the indicated master volume has been aborted by a user. Recommended actions • No action is required. 267 Error While cleaning up resources in metadata at the end of a volume-copy operation, the firmware found at least one error for the indicated volume. Recommended actions • Make sure that the vdisks and disks associated with the volume copy do not have problems (health OK, status FTOL or UP) and then retry the volume copy. 268 Info. A volume-copy operation for the indicated volume has completed. Recommended actions • No action is required. 38 Event descriptions
![](/manual_guide/products/hewlettpackard-msa-1040-hp-msa-events-description-reference-guide-762785001-2014-c70e5ec/38.png)