HP OMEN Transcend 16 Maintenance and Service Guide - Page 45
Before removing the bottom cover, prepare the computer for disassembly see
View all HP OMEN Transcend 16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Before removing the bottom cover, prepare the computer for disassembly (see Preparation for disassembly on page 37). Remove the bottom cover: 1. Remove the six Phillips M2.0 × 4.0 screws that secure the bottom cover to the computer. 2. Insert a thin, plastic tool in the seam between the top edge of the bottom cover and computer to release the cover (1). 3. Remove the bottom cover (2). To replace the bottom cover, reverse the removal procedures. 38 Chapter 6 Removal and replacement procedures for authorized service provider parts
Before removing the bottom cover, prepare the computer for disassembly (see
Preparation for
disassembly
on page
37
).
Remove the bottom cover:
1.
Remove the six Phillips M2.0 × 4.0 screws that secure the bottom cover to the computer.
2.
Insert a thin, plastic tool in the seam between the top edge of the bottom cover and computer to
release the cover
(1)
.
3.
Remove the bottom cover
(2)
.
To replace the bottom cover, reverse the removal procedures.
38
Chapter 6
Removal and replacement procedures for authorized service provider parts