HP OMEN Transcend 16 Maintenance and Service Guide - Page 85
Solid-state drive specifications, This provides specifications for your solid-state drives.
View all HP OMEN Transcend 16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Table 10-2 Display specifications Active diagonal size Resolution Surface treatment Brightness Refresh rate Viewing angle Backlight Display panel interface Metric 40.8 cm 1920 × 1200 (WUXGA) 2560 × 1600 (WQXGA) Antiglare 1180 nits (DCI-P3) 400 nits (100% sRGB) 240 Hz (WQXGA) 165 Hz (WUXGA) UWVA WLED eDP U.S. 16.0 in Solid-state drive specifications This section provides specifications for your solid-state drives. Table 10-3 Solid-state drive specifications 256 GB* 512 GB* 1 TB* Dimensions Height 1.0 mm 1.0 mm 1.0 mm Length 50.8 mm 50.8 mm 50.8 mm Width Weight 28.9 mm < 10 g 28.9 mm < 10 g 28.9 mm < 10 g Interface type PCIe PCIe PCIe Ready time, maximum (to not busy) 1.0 ms < 1.0 ms 1.0 ms Access times, logical Transfer rate 0.1 ms 0.1 ms 0.1 ms Sequential read up to 2150 MBps up to 2150 MBps up to 2150 MBps Random read Up to 300,000 IOPs Up to 300,000 IOPs Up to 300,000 IOPs Sequential write Random write up to 1550 MBps Up to 100,000 IOPs up to 1550 MBps Up to 100,000 IOPs up to 1550 MBps Up to 100,000 IOPs Total logical sectors 468,883,296 1,000,215,216 1,500,336,388 Operating temperature 0°C to 70°C (32°F to 158°F) *1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications might differ slightly. 78 Chapter 10 Specifications