HP OMEN Transcend 16 Maintenance and Service Guide - Page 61
Audio board
![]() |
View all HP OMEN Transcend 16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
■ Use a tool to release the board from the bottom of the system board. The board is secured with adhesive. To install the IR board, reverse this procedure. Audio board To remove the audio board, use this procedure and illustration. Table 6-13 Audio board description and part number Description Audio board Audio board cable Spare part number N43738-001 N43724-001 Before removing the audio board, follow these steps: NOTE: All flat cable connectors are covered with a piece of Mylar to prevent accidental disconnection. Be sure to replace this Mylar during reassembly. 1. Prepare the computer for disassembly (see Preparation for disassembly on page 37). 2. Remove the bottom cover (see Bottom cover on page 37). 3. Remove the battery (see Battery on page 39). 4. Remove the system board (see System board with heat sink on page 48). Remove the audio board: 1. Disconnect the cable from the ZIF connector (1) on the audio board. 2. Remove the Phillips M2.0 × 3.5 screw (2) that secures the board to the computer. 54 Chapter 6 Removal and replacement procedures for authorized service provider parts
![](/manual_guide/products/hewlettpackard-omen-transcend-16-maintenance-service-guide-f4d49af/61.png)