HP OMEN Transcend 16 Maintenance and Service Guide - Page 66
select products only., and then remove
View all HP OMEN Transcend 16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
4. To replace the ambient light sensor (ALS) module: a. Use to tool to detach the module (1) from the display back cover. The module is attached with double-sided adhesive. b. Disconnect the cable from the reverse ZIF connector on the module (2), and then remove the module. The ALS module is available as spare part number N43740-001. 5. You must remove the display assembly from the computer to remove the remaining components. Disconnect the antenna cable from the soldered wireless headset module at the top of the system board (1) (select products only). 6. Disconnect the display cable from the system board ZIF connector (2). Display assembly 59
4.
To replace the ambient light sensor (ALS) module:
a.
Use to tool to detach the module
(1)
from the display back cover. The module is attached with
double-sided adhesive.
b.
Disconnect the cable from the reverse ZIF connector on the module
(2)
, and then remove the
module.
The ALS module is available as spare part number N43740-001.
5.
You must remove the display assembly from the computer to remove the remaining components.
Disconnect the antenna cable from the soldered wireless headset module at the top of the system
board
(1)
(select products only).
6.
Disconnect the display cable from the system board ZIF connector
(2)
.
Display assembly
59