HP OMEN Transcend 16 Maintenance and Service Guide - Page 67
Separate the display from the computer, from each hinge that secure the display assembly
View all HP OMEN Transcend 16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
7. Disconnect the antenna cables from the WLAN module (3), and then remove the antenna cable from the metal routing clips at the top of the computer (4). 8. Open the display (1) to open the hinges. 9. Remove the four Phillips M2.5 × 2.5 screws (2) from each hinge that secure the display assembly to the computer. 10. Separate the display from the computer (3). Note that the hinges need to be folded at an angle to remove the display from the computer, as shown in the following illustration. 60 Chapter 6 Removal and replacement procedures for authorized service provider parts
7.
Disconnect the antenna cables from the WLAN module
(3)
, and then remove the antenna cable
from the metal routing clips at the top of the computer
(4)
.
8.
Open the display
(1)
to open the hinges.
9.
Remove the four Phillips M2.5 × 2.5 screws
(2)
from each hinge that secure the display assembly to
the computer.
10.
Separate the display from the computer
(3)
.
Note that the hinges need to be folded at an angle to remove the display from the computer, as
shown in the following illustration.
60
Chapter 6
Removal and replacement procedures for authorized service provider parts