HP Stitch S1000 User Guide - Page 111
Install the kit, CAUTION, Install the six ink-collector modules
View all HP Stitch S1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Install the kit Crush hazard Risk of trapped fingers Hazardous moving part For more safety information, see Safety precautions on page 2 Electric shock hazard CAUTION: Take care to store the ink-collector modules in the box with the blue latches upwards. Let them fall gently into the box tray. When manipulating the ink collector modules, do not hold them by the blue latches. Use the blue latches only to secure the modules once installed on the print platen. TIP: You are advised to wear gloves. Install the six ink-collector modules 1. Ensure that the printer is not printing. 2. If any substrate is loaded, unload it. Then remove the edge holders from the substrate path. 3. To facilitate module installation, HP recommends raising the carriage beam to the installation position, by clicking the Raise carriage beam to install position button. 4. Ensure that all windows, covers and doors are closed and remain in their original position. 5. Open the ink collector container and check that the ink collector foams are dry and clean enough to be used. Also check that the foams fit into the spaces provided for them. If they have expanded and no longer fit, replace them. NOTE: Ensure that you dispose of the used foams correctly. Consult the guidelines from your local authority. 6. Go to the Internal Print Server and click the Install ink collector button on the main screen. 7. Follow the instructions in the Internal Print Server to complete the installation. If you need further information, read the steps below. ENWW Use the ink collector 105