HP Stitch S1000 User Guide - Page 115

Maintain the ink collector Summary of maintenance operations Frequency Every 80 liters of ink Every 160 liters of ink After uninstalling the ink collector kit, or at the end of each roll After uninstalling the ink collector kit Maintenance operation Replace the ink-collector foams on page 110 Replace the aerosol extractor filters on page 111 Clean the aerosol nozzle plate and filters on page 131 Wipe the ink-collector modules on page 109 Clean the bottom plate on page 131 Printer maintenance on page 109 Clean the print zone on page 129 Clean the substrate-advance sensor on page 134 Part number and description Clean the aerosol nozzle plate and filters See Clean the aerosol nozzle plate and filters on page 131. Clean the output platen See Clean the bottom plate on page 131. Wipe the ink-collector modules Wipe all dirty surfaces, especially the ribs that are in contact with the substrate (see Clean the ink-collector ribs on page 135). If necessary, replace the foams (see Replace the ink-collector foams on page 110). CAUTION: Proper maintenance and genuine HP consumables are required to ensure that the printer operates safely as designed. The use of non-HP consumables (foams, filters, printhead cleaner roll, or inks) may present a risk of fire. Printer maintenance First ensure that you have turned the printer off, and be careful to follow the appropriate safety precautions. Crush hazard Risk of trapped fingers Hazardous moving part For more safety information, see Safety precautions on page 2 Electric shock hazard After using the ink collector kit, the following parts of the printer may be dirty. Check them as follows. Bottom plate 1. Open the output cover so that you can access the bottom plate. See Open the output cover to the maintenance position on page 146. ENWW Maintain the ink collector 109