HP Stitch S1000 User Guide - Page 203
Replace the aerosol fan module (trained expert users only), Finish off replacing a primer
View all HP Stitch S1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
9. Connect the two primer cable connectors. Finish off replacing a primer 1. Close the carriage cover. 2. Turn on the printer in the correct way for maintenance operations: see Turn the printer on on page 126. 3. Run a diagnostic test to check that the new primer is working correctly, and calibrate it. 4. Dispose of the old primer. Replace the aerosol fan module (trained expert users only) Crush hazard Risk of trapped fingers For more safety information, see Safety precautions on page 2 Hazardous moving part Prepare to replace the aerosol fans module 1. Ensure that you have the aerosol fan module, which is included in the basic uptime kit. 2. Ensure that the printer is not printing. 3. Ensure that all windows, covers, and doors are closed and remain in their original position. 4. Move the carriage to the service position. 5. Turn off the printer in the correct way for maintenance operations: see Turn the printer off on page 125. ENWW When required 197