HP Visualize b180L hp Visualize workstation b132L, b132L plus, b160L, and b180 - Page 123

NOTE: Changing Your Workstation's Hardware Configuration Preparing Your Workstation Preparing Your Workstation This section describes how to prepare your workstation for changing its configuration. Use the following procedure to prepare your workstation: 1 Shut down your workstation by typing the shutdown -h command as root user. When you press the power button, the workstation automatically shuts down the operating system before it powers off the system. However, this is not the recommended method for shutting down your system. 2 When the workstation has completed shutting down, turn off the system unit, turn off the monitor, and any peripheral devices connected to the workstation. 3 Unplug the power cord of the system unit, the monitor, and any peripheral devices from ac wall outlets. 4 Unplug the power cord from the back of the system unit. 5 Remove the floor stand from the system unit (if used), as shown in Figure 20. 109