HP Visualize b180L hp Visualize workstation b132L, b132L plus, b160L, and b180 - Page 142
Installing a Hard Disk Drive in Position 2 Front Position
View all HP Visualize b180L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Changing Your Workstation's Hardware Configuration Installing Storage Devices 3 Align the four feet on the bottom of the disk drive carrier with the square holes in the storage tray, as shown in Figure 35. Figure 35 Installing a Hard Disk Drive in Position 2 (Front Position) 4 Set the drive in the storage tray. 5 Connect the power connector and the appropriate SCSI connector to the drive. 6 Push the drive toward the rear of the tray until the locking tab on the drive carrier snaps into place, as shown in Figure 35. 128
128
Changing Your Workstation’s Hardware Configuration
Installing Storage Devices
3
Align the four feet on the bottom of the disk drive carrier with the square holes in
the storage tray, as shown in Figure 35.
Figure 35
Installing a Hard Disk Drive in Position 2 (Front Position)
4
Set the drive in the storage tray.
5
Connect the power connector and the appropriate SCSI connector to the drive.
6
Push the drive toward the rear of the tray until the locking tab on the drive carrier
snaps into place, as shown in Figure 35.